#Airport Utility Mac With OS

Airport Utility Mac With OS

USB printer Mac with OS X v10.2.7 or laterFor more than a decade, the only reasonable way to configure AppleвЂ™s AirPort Wi-Fi equipment was through a software package the company provided for Mac OS X (and, several years ago, for Windows). Shared Printing with a USB Printer. Any WiFi-enabled device that uses the 802.11a/b/g/n/ac specification. IPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3 Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3 Wireless Device Access.

Just tap the Manage This Network button.The first thing you see when you launch AirPort Utility for iOS on an existing network with multiple base stations is what IвЂ™ve been wanting in the desktop version for years: a graphical schematic (with accurate icons for each variety of hardware) that shows network topology. You can also use AirPort Utility for iOS to set up and manage a network for someone elseвЂ”such as my senior-citizen next-door neighbor, who has an iPad and a Wi-Fi network, but not a computer.You can launch the app directly, or access via the Settings app, where youвЂ™ll find it below any active Wi-Fi connectionвЂ™s configuration details in the Wi-Fi Networks section. To fix: open Apples AirPort Utility and click the edit button next to each.While itвЂ™s unlikely you would have a home or office without a single computer, the app still makes it possible to configure a network without having to install AirPort Utility anywhere. The mobile app is missing just some advanced configuration options and diagnostics that are typically required only by system administrators and early adopters.Tap or click the download icon to try downloading the film or TV programme. As part of the outburst of cord cutting that came with last weekвЂ™s release of iOS 5, Lion 10.7.2, and iCloud, Apple also pushed out an iOS version of AirPort Utility that has nearly the same functionality as the desktop flavor. That limitation is no more, however.

The illustration is hierarchical, with the Internet on the top layer, followed by the coordinating base station, and then the others. In a screen capture provided by Apple in the App Store, a network is shown in which a main base station connected to broadband in turn provides network access (and DHCP-assigned addresses) via a wireless link, shown as a dotted line, and a wired Ethernet connection. That dot turns yellow with errors and red with show-stopping problems, such as a dead Internet feed.AirPort Utility shows the topology of the network: the base stations that comprise it, and the connections among them.On more complicated networks, the illustration becomes much more useful. Note that a green dot appears next to the Internet if itвЂ™s available, and next to each properly configured base station. This is neatly depicted as a giant globe for the Internet, with solid lines linking it to the three base stations. My home network is currently set up with three base stations, all of which obtain private addresses via DHCP from a cable modem to which they are connected via Ethernet.

On the iPad, a pop-over menu is used instead.) Once the password is accepted, you can get into reviewing or changing the device settings in earnest.(Note that the AirPort Utility iOS app currently has a gaping security flaw: Once you enter a base stationвЂ™s configuration password, that password is saved, with no way to force the app to forget itвЂ”not even by deleting the app and reinstalling it. (On the iPhone, this is a subsequent screen. Tap a base station and youвЂ™re prompted for a password, which is stored in the app. Tap the Internet, and it shows the current network status, IP address, DNS servers, and the domain name if oneвЂ™s assigned.

Tap the firmwareвЂ™s version number, and you can update the access point to a newer release or revert it to a previous one. You can also change the base stationвЂ™s password using the Mac version of AirPort Utility, which will prevent the iOS app from being able to connect.)The main screen for a base station shows its IP address, serial number (useful for AppleCare service or questions), the current firmware release installed, its network name, and the number of attached wireless clients if any are connected. If youвЂ™re concerned about someone being able to access your base stationвЂ™s settings using the app, be sure to set a passcode lock on your iOS device.

Like I saidвЂ”for gearheads. Tap that descriptionвЂ”weвЂ™re in deep now, boysвЂ”and the technical values for the data rate, noise factor, and 802.11 protocol employed are revealed. (ThatвЂ™s a series of numbers and letters assigned to Wi-Fi and Ethernet adapters they reveal little on their own.)Tap a client in the list, and you see a connection label that describes the connection with words like Average or Excellent. Base stations that are bridging address assignments from an ISP or from another base station on the network will see a list of clients by hexadecimal dotted-sextet MAC (Media Access Control) address. On a base station thatвЂ™s providing addresses via DHCP to wireless clients, youвЂ™ll see either the internal IP address or DHCP Client ID. Tap once, and youвЂ™ll see a list of clients.

A base station has its own name separate from that of the network, and access to its configuration is protected by a password. These divisions donвЂ™t precisely match up with the desktop utilityвЂ™s organization, and omit many settings.These two areas of the app are the simplest to use. The app divides configuration into four parts: Base Station, Network, Internet Connection, and Advanced, and we shall review each in turn. Back up at the top level of a base station, after you select it in the graphical view, tap Edit, and you may configure at will. On an iOS device, open Settings, tap General -> About, and scroll down to Wi-Fi Address.)ThatвЂ™s all the prelude to the real meat.

The Security item lets you choose the form of encryption you want to use to restrict connections to this base station (orвЂ”not recommendedвЂ”no encryption at all). You choose Extend a Wireless Network when youвЂ™re connecting multiple base stations via Wi-Fi instead of Ethernet. From the Network screen, you can set the Wi-Fi mode, change security methods, name the network, change its encryption (access) password, and opt to hide the network in a somewhat useless way.For most single base station networks, a routerвЂ™s Wi-Fi Mode is set to Create a Wireless Network. This is typically DHCP for home users.Network contains most of the wireless options available in the app most of the settings here are found in the AirPort view of the Mac version of the utility. You pick among DHCP, Static, or PPPoE for the way in which the base station obtains an address or talks to a broadband router. If youвЂ™re setting up a new base station, I recommend picking something distinctive, such as вЂњDownstairs ExpressвЂќ so that you can easily identify the router by name.The Internet section is likewise straightforward.

You may modify the default network name for the guest network, and set a password that guests need to use to join it. Tap the Guest Network button, and then on the next screen, tap the Guess Network switch to turn it on. The general recommendation is to use WPA2 Personal for networks involving hardware from 2003 and later, and WPA/WPA2 Personal if you have any older devices.Common network options are easily set, such as security.The Hide Network switch prevents the base station from broadcasting its nameвЂ”a so-called вЂњclosed networkвЂќвЂ”although in practice this provides nearly no additional security.The Guest Network switch in the main Edit screen appears only if the base station is set to provide IP addresses to clients, but it will not appear if either DHCP or NAT are turned offвЂ”Apple relies on these two (related) address-handling features to make guest networking work.

Airport Utility Download For Mac